Sioux-chief 825 Series Shower Drain Bedienungsanleitung PDF herunterladen

Sioux Chief Manufacturing Company • tel: 1-800-821-3944 • www.siouxchief.com • fax: 1-800-758-5950

INSTALLATION INSTRUCTIONS

825 Series Shower Drain

The 825 Series shower drains are used with ﬁ berglass shower bases or one-piece

shower units.

To install, separate the drain into a top (male threads / strainer) and bottom

(female threads / glue hub / washers) portion.

Apply a bead of silicone to the underside of the top portion, then place it through

the drain hole in the shower base.

From underneath the shower, place the black rubber sealing washer, then friction

washer then bottom portion over the male threads, and tighten. The friction washer

protects the rubber from damage while the bottom portion is threaded on and

tightened up.

From the top side of the shower, remove any excess silicone that has squeezed out.

The ﬁ berglass shower base is sandwiched between the top portion (male threads)

and the bottom portion. The sealing washer on the under side, along with the

silicone sealant applied between the shower ﬂ oor and the top portion, keeps the

drain water tight.

Solvent weld the drain pipe into the hub in the bottom portion using the appropriate

solvent cement. Allow 24 hours for the silicone to cure, and check installation for

leaks.

Subfloor

Fiberglass

shower base

Sealing washer

Friction washer

Apply a bead of silicone

Sioux Chief Manufacturing Company • tel: 1-800-821-3944 • www.siouxchief.com • fax: 1-800-758-5950INSTALLATION INSTRUCTIONS825 Series Shower DrainThe

Keine Kommentare

Sioux-chief 825 Series Shower Drain Bedienungsanleitung